Midland M-88 Instruction Manual page 44

Keypad lock
To prevent accidental pressure of any key or changing channel, the keypad can be
locked.
1. Press FN (5) followed by the  key (7);
2. the display will show this icon
3. To unlock the keyp press FN (5) follow the same steps.
Activating NOISE BLANKER and HIC filters
The Noise Blanker and HIC filters allow to reduce noises and interferences coming
from the antenna.
To activate Noise Blanker , press FN (5) and then push the key on the main selector
(14).
If you repeat this procedure, also the HIC filter will be activated.
The display will show :
If you push FN (5) and the control on the main selector again, the filters will be
deactivated.
Functions and parameters setting
The menu allows to customize the functions and parameters of the radio.
Press EMG/MENU (6) for more than 2 seconds; the display will show the
1.
three menu available that you can select:
2. The desired menu can be selected in the following ways:
• By rotating the main selector (14);
• By pressing the / keys (7);
• By pressing the UP/DOWN of the microphone (3) (5).
3. Confirm your selection by pushing the button on the main selector (14).
Midland 88 Instruction Guide
as confirmation.
SELECT MENU
1 FUNCTIONS
2
PARAM SET
SOFT VER
3
| 15