Sony TA-ZH1ES Service Manual page 74

TA-ZH1ES
Pin No. Pin Name
GP1[2], GP1[3],
F16 to F19
GP2[15], GP1[0]
GP8[15], GP8[14],
G1 to G4
GP8[12], GP8[8]
G5 DVDD3318_A
G6 DVDD18
G7, G8 CVDD
G9 DVDD3318_B
G10 to
DVDD18
G12
G13 CVDD
G14, G15 DVDD3318_A
G16 GP1[5]
G17 SPI1_SIMO
G18 GP1[4]
G19 SPI1_CLK
H1, H2 SATA_VSS
H3 GP6[4]
H4 GP8[9]
H5 DVDD3318_A
H6, H7 CVDD
H8, H9 VSS
H10 to
CVDD
H13
H14 RVDD
H15 VSS
H16 GP2[12]
H17 SPI1_SOMI
H18 RTC_VSS
H19 RTC_XO
J1 SATA_TXP
J2 SATA_TXN
J3 GP6[2]
J4 GP8[13]
J5 DVDD3318_C
J6 CVDD
J7 to J11 VSS
J12 CVDD
J13 DVDD18
J14 DVDD3318_B
J15 TCK
J16 EMU0
J17 NMI
J18 TDO
J19 RTC_XI
K1, K2 SATA_VSS
K3 GP6[3]
K4 GP6[1]
K5 DVDD18
K6 CVDD
K7 to K11 VSS
K12 CVDD
K13 DVDD3318_C
K14 RESET
K15 DVDD3318_B
K16 EMU1
K17 GP8[0]
K18 USB0_DRVVBUS
K19 OSCOUT
74
I/O
I/O Not used
I/O Not used
- Power supply terminal (+3.3V)
- Power supply terminal (+1.8V)
- Power supply terminal (+1.2V)
- Power supply terminal (+3.3V)
- Power supply terminal (+1.8V)
- Power supply terminal (+1.2V)
- Power supply terminal (+3.3V)
I I2C serial clock signal input from the system controller
O Serial data output to the serial fl ash
I/O Two-way I2C data bus with the A/D converter and system controller
O Serial data transfer clock signal output to the serial fl ash
- Ground terminal
PCM status signal output to the system controller
O
"L": PCM playback, "H": PCM non-playback
I/O Not used
- Power supply terminal (+3.3V)
- Power supply terminal (+1.2V)
- Ground terminal
- Power supply terminal (+1.2V)
- Power supply terminal (+1.2V)
- Ground terminal
I/O Not used
I Serial data input from the serial fl ash
- Ground terminal
O Real time clock output terminal
O SATA transmit data (positive) output terminal
O SATA transmit data (negative) output terminal
O Clock selection signal output to the system controller
I/O Not used
- Power supply terminal (+3.3V)
- Power supply terminal (+1.2V)
- Ground terminal
- Power supply terminal (+1.2V)
- Power supply terminal (+1.8V)
- Power supply terminal (+3.3V)
I JTAG test clock signal input terminal
I/O Emulation terminal Not used
I Non-maskable interrupt signal input terminal
O JTAG test data output terminal
I Real time clock input terminal
- Ground terminal
USB connection status signal output to the system controller
O
"L": USB connected, "H": USB not connected
O Muting request signal output to the system controller
- Power supply terminal (+1.8V)
- Power supply terminal (+1.2V)
- Ground terminal
- Power supply terminal (+1.2V)
- Power supply terminal (+3.3V)
I Reset signal input from the system controller
- Power supply terminal (+3.3V)
I/O Emulation terminal Not used
I/O Not used
O VBUS control signal output terminal
O System clock output terminal (26 MHz)
Description
Not used
Not used
Not used
"L": 45.1584 MHz, "H": 49.152 MHz
Not used
Not used
Not used
Not used
"H": muting request
"L": reset
Not used