Power State Summary; Thermal Power Control - Asus A7Db Hardware User Manual

Asus a7db: user guide
Hide thumbs Also See for A7Db:
Table of Contents

Advertisement

Power State Summary

STATE ENTRY EVENT
"Stand by"
STR ("Stand by")
(Suspend-to-RAM)
STD ("Hibernate")
(Suspend-to-Disk)
Soft OFF

Thermal Power Control

There are three power control methods for controlling the Notebook PC's thermal state. These power
control cannot be configured by the user and should be known in case the Notebook PC should enter
these states. The following temperatures represent the chassis temperature (not CPU).
The fan turns ON for active cooling when the temperature reaches the safe upper limit.
The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.
The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.
• "Stand by" through Windows Start button,
• Timer as set though "Power Management"
in Windows Control Panel (higher priority)
• Hotkey [Fn][F1]
--
• Hotkey [Fn][F1]
--
• Power button (can be defined as STR or STD) • Power button
• "Shut down" through Windows Start button
Using the Notebook PC
EXIT EVENT
• Any device
• Battery low
• Signal from modem port
• Power button • Any key
• Power button
• Battery Extremely Low
4
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A7dA7dcA7vbA7vcA7gA7v ... Show all

Table of Contents