Apm Configuration - Asus Vintage PE1 User Manual

5.5.5 5.5.5 5.5.5

APM Configuration

APM Configuration APM Configuration
5.5.5 5.5.5 APM Configuration APM Configuration
Power Button Mode
Restore on AC Power Loss
Power On By PS2 Keyboard
Power On By PS2 Mouse
Power On by PCI Devices
Power On By External Modems
Power On By RTC Alarm
Power Button Mode [On/Off] Power Button Mode [On/Off]
Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Always OFF] Restore on AC Power Loss [Always OFF] Restore on AC Power Loss [Always OFF]
Restore on AC Power Loss [Always OFF] Restore on AC Power Loss [Always OFF]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Always OFF] [Always On] [Keep Previous State]
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Allows you to disable the PS/2 Power-On by keyboard feature or use
specific keys on the keyboard to turn on the system. This feature requires
an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled]
Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
5 - 2 6 5 - 2 6 5 - 2 6
5 - 2 6 5 - 2 6
[On/Off]
[Always OFF]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p C h a p t e r 5 : B I O S s e t u p