Saneo A010A-12C Manual page 56

The images are not contractual.
SELECTIVE COLLECTION OF ELECTRICAL AND ELECTRONIC WASTE
Electrical products should not be disposed of with household products. According to the
European Directive 2012/19/EU for the disposal of electrical and electronic equipment and
its implementation in national law, used electrical products must be collected separately
and disposed of at the collection points provided for this purpose. Contact your local
authorities or dealer for recycling advice.
WARRANTY TERMS AND CONDITIONS
This product is guaranteed for a fixed period of time with the distributor from the date of
purchase against any failure resulting from a manufacturing or material defect. This
warranty does not cover defects or damage resulting from improper installation, improper
use or abnormal wear and tear of the product.
The device must be returned in its original packaging and with the receipt, subject to
proper handling. Therefore, observe the operating instructions and safety instructions
given above. In addition, we cannot guarantee your device if you or a third party has made
any modifications or repairs.
SERVICE OPERATIONS
This document describes the precautions for use by personnel responsible for service
operations.
Any person required to work on a refrigerant circuit should hold a valid and up-to-date
certificate from an assessment authority accredited by the industry and recognising his
competence to handle refrigerants safely, in accordance with the assessment
specification recognised in the industry sector concerned.
Service operations must only be carried out in accordance with the recommendations of
the equipment manufacturer. Maintenance and repair operations requiring the assistance
of other qualified persons must be carried out under the supervision of the person
competent for the use of flammable refrigerants.
- Checking the area:
Before starting work on systems containing flammable refrigerants, safety checks are
necessary to ensure that the risk of ignition is reduced. For repairs to the refrigeration
system, the following precautions must be observed before working on the system.
- Intervention procedure
Interventions must be undertaken as part of a controlled procedure in order to minimise
the risk of flammable gas or vapour during the work.