Benthin P1614 Quick Start Manual

Installation
5. Assemble pleat
Slide the tension cord bracket onto the clamping carrier.
Tension cord
bracket
1
Clamping B
carrier
A
3
6. Operate the pleats and check the function
The handle allows the pleats to move smoothly to any desired
position. Après vérification du bon fonctionnement du store,
2
les bouts de cordons excédentaires peuvent être coupés.
4
Attention: Adjustment of the cord tension must be uniform and
may only be made by a professional!
Thanks to a special manufacturing process, our fabric qualities are
furnished with an antistatic finish and are therefore resistant to
dust and dirt.
Occasional brushing with a soft brush or a feather duster is usually
sufficient.
When cleaning glass and the window frame, make sure that no
water or caustic cleaning agents come into contact with the
pleated blind fabric.
No guarantee can be offered for damage to fabrics that is
attributable to condensate, cleaning agents or soiling by insects.
For further care information refer to the cleaning instructions.
. Misprints, errors and changes excepted . Version 30-06-2016 . 97000249
®
© 2016 Benthin
Installation
B
A
Operating
handle
Care
Installation – Operation – Care
Model P1614
Variant A
Pleated blind
IN
of the glazing bead
A
B
Dear Customer,
this dimensionally accurate pleated blind was produced especially
according to your requirements. High qualilty materials and a design that is
perfect in function and elegance guarantee a long service lifetime and thus
ensure great pleasure in the purchased product.
Your pleated blind Manufacturer
Please read this intructions carefully
before fitting the blind
Blinds must be fitted by skilled personnel.
Wrong installation may result in accidents.
Alterations of the blind must be approved by the blind manufacturer.
Variant B
Pleated blind
IN FRONT
of the glazing bead