How To Make Nanoe™ X Wiring Arrangement - Panasonic nanoe CZ-CNEXU1 Installation Instructions Manual

Installation
How to Install nanoe™ X kit for 4-Way Cassette
(3) Attach the nanoe™ X module to the indoor unit not to cause backlash.
Attach the nanoe™ X module to the indoor unit
so that it can insert into the nanoe™ X outlet.
nanoe™ X outlet
nanoe™ X module
How to Make nanoe™ X Wiring Arrangement
(1) Make wire routing as shown in the fi gure below.
(2) Insert the connector into the CN076/NANO.
When closing the lid of electrical component box, take caution the wires should not be caught by
the lid.
6
Arrange the wires inside
the resin tabs.
Wires
Cross-section A-A
Fix the nanoe™ X module with
the supplied screws (×2).