Operation Introduction - OLIGHT M20 Warrior Premium Operator's Manual

Operation Introduction

Loosen
No
1 Striking Bezel
2 Head(Upside)
3 Reflector
Head(Downside)
4
5 Battery Tube
For momentary light, gently press (no click) the tailcap pushbutton switch.
For constant light, fully press (click) the tailcap pushbutton switch.
To switch functions, click on the light, loosen the head
(see figure 4) by 1/8 of a circle and then tighten it down, the light
will move to the next function. Repeat the same operation
for further functions.
Lockout Mode:To lock out the switch, rotate the tailcap(see figure 8)
Approximately
prevents accidental activation during storage or transport.
Name
180 counter-clockwise. The lock-out position
No Name
6 Clip
7 Tactical Ring
8 Tailcap
9 Battery Magazine
10 Battery
.5.