Configure The Fixture; Set The Dmx Address; Play Presets And Sequences - ETC Source 4WRD Color Quick Manual

ETC Quick Guide
Source 4WRD Color (CE) Version 1.0.0

Configure the Fixture

Use the up and down navigation buttons
to configure the fixture.
Set the DMX Address
1. Press any button to wake the
display. The display shows the
DMX address.
2. Use the Up and Down buttons to
select the DMX address for the
fixture.

Play Presets and Sequences

The fixture has twelve factory-configured
presets and five factory-configured sequences. When you play a preset or
sequence on a fixture:
The same preset number or sequence number plays on any connected
•
fixtures that are not receiving DMX.
If you power down the fixture, the preset or sequence resumes when
•
you power it on again.
1. Press the Up button and Down button simultaneously to activate the
Presets/Sequences menu. The last active preset or sequence plays
automatically. (If DMX data is present, the current preset or sequence
plays in the background and DMX data continues to take priority.)
2. Press the Up button or Down button as needed to scroll through the
available presets and sequences.
3. To stop the selected preset or sequence, press the Up button and
Down button simultaneously. The display will revert to show the DMX
start address.
Source 4WRD Color (CE) Page 7 of 8
Up and down
navigation buttons
User interface
ETC