8.3 Cleaning the control panel
Use a standard neutral soap detergent
to clean the control panel.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
Do not use furniture cleaning agents
or cleaning agents which can cause
8.4 Cleaning The Water Inlet
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
To clean the water inlet filters:
Close the water tap.
Remove the water inlet hose from
the water tap.
Clean the filter in the inlet hose with
a stiff brush.
Remove the inlet hose behind the
Clean the filter in the valve with a
stiff brush or a towel.
Re-install the inlet hose. Make sure
that the couplings are tight to
Open the water tap.