Ir Sensor; Batteries; Cleaning - Philips 7906 Series User Manual

Hide thumbs Also See for 7906 Series:
Table of Contents

Advertisement

4 - MENU
To open the TV Menu with typical TV functions.
5 - Channel
Press + or - to switch to the next or previous
channel in the channel list. To open the next or
previous page in Text/Teletext.
6 - Mute
Press to mute the sound or to restore it.
7 - SUBTITLE
To open Subtitle page.
3.2

IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.3

Batteries

If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back-bottom of the remote
control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2 type AAA-1.5V
batteries. Make sure the + and the - ends of the
batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, in Help, select Keywords and
look up End of use.
3.4

Cleaning

Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

43pus790650pus790655pus790665pus790670pus7906

Table of Contents