Indoor Ceiling/Wall Mounting
(Optional)
The camera dome attaches to one of the following
optional indoor mounting structures (Figure 4).
Sheet Rock, Concrete, Plaster or Wood Ceilings
RHIUTH
Top hat housing with trim ring.
This housing attaches to a ceiling or to
most indoor mounting structures. A trim
ring and optional magnetic bubble
provide concealment. Optional bubbles:
RUCLR (clear), RUSLV (silver), RUSMK
(smoked), or RUGLD (gold).
Dome base included.
RHIUHC
Hard ceiling bracket.
Enables top hat housing to be recessed
in ceiling (requires top hat RHIUTH).
Can be installed from below ceiling.
RHIUFB
Fixed bracket.
Enables top hat housing to be recessed
in ceiling (requires top hat RHIUTH).
Requires access from above ceiling.
RHIUPNDT†
Pendant mount.
Suspends dome from a hard ceiling with
3.2cm (1 1/4in) NPT pipe fittings.
Structural I-Beams
RHIUIB /
I-beam mount only.
RHIUIBM†
Enables dome suspension from an
I-beam. RHIUIBM version has all related
accessories to suspend from I-beam,
except 3.2cm (1 1/4in) NPT pipe.
Electrical Box in Ceiling
RHIU3X3
3 X 3 mounting plate.
Attaches dome to a standard
3.5 x 3.5 duplex electrical box.
CAUTION: Do not use the same
electrical box used for line voltage
mains.
RHIU4X4
4 X 4 mounting plate.
Attaches dome to a standard 4 x 4
duplex electrical box.
CAUTION: Do not use the same
electrical box used for line voltage
mains.
* Option in white, but can be painted to match decor.
† Top hat housing/dome assembly also mounts to structure.
INSTALLATION AND SERVICE GUIDE