Installer Remote Control Typical Key Functions - LG 22LY560M Commercial Mode Setup Manual

Reference: Installer Remote Control Typical Key Functions
An LG Installer Remote is required to set up and operate the TV. The LG Installer Remote illustrated below
shows typical remote control functions and is provided for reference only.
TV LG1/TV LG2 & TV Z1/TV Z2
Selects the IR codes sent by the remote to
match the setting in the TV.
NUMBER Buttons (0 - 9) & DASH
Use to enter a channel or program number.
Dash is used for sub-channel numbers such as
FLASHBK (Flashback)
Returns to the previously tuned channel.
Changes channels based on channels in
Increases/decreases sound level.
Arrows (Up/Down/Left/Right) & OK
Use to navigate on-screen menus, direct tune
channels, and adjust TV settings.
Selects Channel Bank 1, 2, 3, or 4 when Hospital
Mode is enabled and the channel lineup resides
in the TV's PTC. Otherwise, this button displays
Displays and exits the Channel Preview/Banks
Switches sound On or Off.
Sets the amount of time before the TV
automatically turns itself Off.
Enables users to schedule a one-time "alarm"
event, in which the TV turns itself On at the
Clears all on-screen displays and returns to TV
206-4261
9-1, 9-2, etc.
CHANNEL UP/DOWN
the channel lineup.
VOLUME UP/DOWN
CH. BANK
available Aux inputs.
CH. PREVIEW
Setup Menu.
MUTE
TIMER
ALARM
user-specified time.
EXIT
viewing.
POWER
TV
TV
LG1 LG2
TV TV
MENU
Z1 Z2
FLASHBK
INFO
PORTAL GUIDE
VOL CH
+ +
OK
VOL CH
CC
SAP
CH. CH.
MUTE
PREVIEW
BANK
TIMER ALARM EXIT
POWER
Turns the TV On or Off.
MENU
Displays and removes the TV setup menus (or, if
applicable, the Function Menu).
PORTAL
Displays and removes the Pro:Centric interactive
menu.
INFO
Displays channel information.
GUIDE
Displays and removes the Pro:Centric channel
guide/EPG.
(RETURN)
Returns one level to the previous menu/
display.
Color buttons access special functions in some
menus.
CC
Activates subtitles, unless the Channel
Preview/Banks Setup Menu is currently on the
screen, in which case this option displays the
Lock (V-Chip) Menu.
SAP
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes the audio
language, if additional languages are available. *
*
SAP notes:
•
SAP settings are retained for individual analog
channels when TV is turned Off/On.
•
If SAP is selected and no SAP is provided, sound
may not be heard on channel.
•
Each analog channel may have its own SAP setting.
•
Digital channels will reset to default audio language
when TV is turned Off/On.
75