Indoor Unit; Outdoor Unit; Preparation Before Operation - Mitsubishi Electric MSZ-BT20VG Operating Instructions Manual

D
ISPOSAL
To dispose of this product, consult your dealer.
Note:
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2012/19/
EU Article 14 Information for users and Annex IX, and/
or to the directive 2006/66/EC Article 20 Information for
end-users and Annex II.
Fig. 1
N
AME OF EACH PART

Indoor unit

Front panel
Air fi lter
(Air purifying
fi lter)
Air cleaning fi lter
(Silver-ionized
air purifi er fi lter,
option)
Horizontal vane
Air outlet
Heat exchanger
Spec name plate *1
Operation indicator lamp
Remote control receiving
section
Emergency operation switch *2
P
REPARATION BEFORE OPERATION
Before operation: Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
4.
Press RESET.
1.
Remove the front lid.
Air inlet (up side)
Wi-Fi interface
When the remote controller cannot be used...
*2
Emergency operation can be activated by pressing the emergency operation switch (E.O. SW)
on the indoor unit.
Each time the E.O. SW is pressed, the operation changes in the following order:
Emergency
2.
Insert the negative
pole of AAA alkaline
batteries fi rst.
3.
Install the front lid.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high
quality materials and components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and
accumulators, at their end-of-life, should be disposed of separately from your
household waste.
If a chemical symbol is printed beneath the symbol (Fig. 1), this chemical sym-
bol means that the battery or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical
and electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your
local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!

Outdoor unit

Outdoor units may be different in appearance.
*1 The manufacturing year and month are indicated on the spec name plate.
Emergency
COOL HEAT Stop
Setting current time
1.
Press CLOCK.
3.
Press CLOCK again.
Air inlet (back and side)
Spec name plate *1
Refrigerant piping
Drainage hose
Air outlet
Drain outlet
Set temperature : 24°C
: Lit
Fan speed : Medium
: Not lit
Horizontal vane : Auto
2.
Press the TIME buttons to set
the time.
Each press changes the clock
1 minute forward/backward
(10 minutes when pressed
longer).
EN-3
EN