Specifications; Cordless Screwdriver Safety Warnings - Makita DFT041F Instruction Manual

Hide thumbs Also See for DFT041F:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
(Original instructions)
1
Red part
2
Button
3
Battery cartridge
4
Indicator lamps
5
Check button
6
Switch trigger

SPECIFICATIONS

Fastening torque
No load speed (min
Dimensions (L x W x H)
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CORDLESS SCREWDRIVER SAFETY
WARNINGS
1.
Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the oper-
ator an electric shock.
4
Explanation of general view
7
Reversing switch lever
8
Lamp
9
LED indicator
10 Adjust ring
11 Ring
12 Adjust grip
Model
Hard joint
Soft joint
–1
)
Net weight
BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 / BL1460A / BL1460B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
DFT041F
1 – 4 N•m
1 – 4 N•m
800
2.
Always be sure you have a firm footing.
ENE033-1
Be sure no one is below when using the tool in
high locations.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
GEA010-2
5.
Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
6.
Always secure workpiece in a vise or similar
hold-down device.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
GEB139-1
injury.
IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
13 Scale
14 Hole for adjust grip
15 Yellow line
16 Compression spring
17 Bit
18 Sleeve
DFT082F
3 – 8 N•m
3 – 8 N•m
860
191 mm x 72 mm x 266 mm
1.3 – 1.6 kg
D.C. 14.4 V
DFT124F
5 – 12 N•m
5 – 12 N•m
600
ENC007-12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dft082fDft124f

Table of Contents