Changing Settings From Operation Panel - Canon Pixma G3060 Series Online Manual

Changing Settings from Operation Panel

This section describes the procedure to change the settings in the Device settings screen, taking the steps
to specify Prevent abrasion as an example.
Note
• The (asterisk) on the LCD indicates the current setting.
1. Check that printer is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Select Device settings and then press the OK button.
The Device settings screen is displayed.
4. Select a setting item to adjust and then press the OK button.
The setting screen for the selected item is displayed.
5. Select a setting item and then press the OK button.
6. Select a setting to specify and then press the OK button.
For more on setting items on the operation panel:
Setting Items on Operation Panel
159