Operating Your Breville Juice Fountain - Breville Juice Fountain JE900 Instructions For Use And Recipe Book

ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN cont'd
Continue to slide the food pusher down the
feed chute. (Please see 5B.)
Step 6.
Place the Pulp Container into position by
tilting the pulp container slightly.
Hint:
To minimize washing up we suggest you
place a plastic freezer bag (or plastic grocery
bag) into the pulp container to collect the
pulp. The bag may also prevent pulp from
spitting out of the pulp container.
(Please see page 11.)
Step 7.
Place the juice jug provided under the spout
on the right hand side of the Juice Fountain.
A glass could also be used to
collect the juice.
10
Fig 5B.
Fig 6.
Fig 7.

OPERATING YOUR BREVILLE JUICE FOUNTAIN

Step 1.
Wash your selection of fruit and vegetables
ready for juicing.
Most fruit and vegetables
such as apples, carrots and
cucumbers will not need to
be cut to size as these will fit
into the feed chute whole.
When juicing carrots place
the tip of the carrot in last.
Step 2.
Ensure the Juice Fountain is correctly
assembled. (See pages 7, 8 and 9.) Ensure you
place the juice jug under the spout while juicing.
Step 3.
Plug the power cord into a power outlet and
turn the power 'ON'. Turn the 'ON/OFF' switch
on the Juice Fountain down to the 'ON' position
to start the Juicer operating.
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO
CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.
Step 4.
With the motor running place food down the
Feed Chute. Using the Food Pusher, gently
guide food down the Feed Chute. To extract
the maximum amount of juice, always push
the Food Pusher down slowly.
Fig 4.
TO EXTRACT
MAXIMUM JUICE
PUSH DOWN
SLOWLY
Step 5.
Juice will flow into the juice jug and the
separated pulp will accumulate in the
Pulp Container.
The Pulp Container can be
emptied during juicing by
turning the Juice Fountain
'OFF' and then carefully
removing the Pulp Container.
(Replace empty Pulp
Container before continuing
to juice.)
11