This chapter explains how to get right into KeyWords on an
AlphaSmart device. Specifically, it describes
•
Starting KeyWords
•
Adding a user
•
Stepping through lessons
•
Checking progress
Getting started
This section walks you through the basic tasks in KeyWords. It
assumes that you, the user, are a student who plans to complete the
lessons in KeyWords.
It explains how to start KeyWords, add a student, and begin using
the lessons. It's a good idea to have on hand the visual materials
described in "Materials for handouts and transparencies" on page 45
in case you need to refer to them while working through the tasks.
Tip!
While working on the tasks in this section, if you need to go
back to the previous screen on the AlphaSmart device, just press
. Pressing
esc
screen.
Starting KeyWords
Before you begin, make sure KeyWords is installed on your device.
To check, press
you see KeyWords in the SmartApplets menu, KeyWords is already
Using KeyWords
Using KeyWords
within KeyWords takes you back to the previous
esc
on/off
to turn the device on, then press
Chapter 2
applets
. If
5