Advertisement
1. Remove round battery cover to access clock movement and
battery compartment(s).
2. Insert 1 AA battery into the movement in the center of the clock.
3. OPTIONAL: For extended battery life, install two additional
batteries, one on either side of the movement.
4. Spin the time set wheel to set the time.
Indoor: Mount the clock on a wall with the hanging hole on the back of
the clock.
Outdoor: Choose a location with an overhang to protect the clock from
the overhead sun or standing snow or rain.
A shaded location will prevent inaccurate temperature readings. Mount
the clock on a wall with the hanging hole on the back of the clock. Be
sure the battery cover is on snug.
Temperature and Humidity
The La Crosse Clock Co. wall clock has two analog sensors that
measure surrounding temperature and humidity. The temperature
information is displayed in degrees Fahrenheit and Celsius, and humidity
data is displayed in percentage.
Get Started
+
+
AA
-
-
Position Clock
Time set
wheel
Battery
cover
2 |
P a g e
Advertisement
