Loading Envelopes - Epson Stylus Color 660 Manual

If you wish to print on the reverse side of an Ink Jet Card with
Maximum selected as the Printable Area setting, flatten the
cards or curl them slightly toward the opposite side before
loading. Set the adjust lever to the "+" position before
printing.
About special media cleaning sheets
Cleaning sheets packaged with EPSON special media should not
be used with this printer. The cleaning function performed by
these sheets is not necessary with this type of printer, and the
sheets could jam in the printer.

Loading Envelopes

When printing on envelopes, please note the following:
You can load up to 10 envelopes into the sheet feeder.
Note:
The folding quality and thickness of envelopes varies widely. If the
total thickness of the stack of envelopes exceeds 10 mm, press each
envelope in the stack flat before loading.
Set the adjust lever to the "+" position. To do this, open the
printer cover and reposition the lever.
Note:
Return the adjust lever to the "0" position, which is the normal
position, after you finish printing on envelopes. Leaving the
lever in the "+" position may cause gaps to appear in images
printed on other media.
When the adjust lever is in the "+" position, make sure the High
Speed setting in the printer driver's Advanced dialog box is off.
To turn this option off, you may also need to change the Print
Quality setting.
-14
Paper Handling