Subscribe to Our Youtube Channel
Related Manuals for NOVAERUS Protect 900
Summary of Contents for NOVAERUS Protect 900
- Page 1 Protect 900 User Manual (NV900) Novaerus, US Inc. 35 Melrose Pl. Stamford, CT 06902 Phone: 1.866.515.5181 www.novaerus.com Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US...
-
Page 2: Table Of Contents
......... . 10 11. Product Certifications ...11 12. APPENDIX A. Guidance and Manufacturer’s Declarations Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US... -
Page 3: Intended Purpose
1. Intended Purpose The intended purpose of the Novaerus Protect 900 (NV900) is to improve the quality of air. Please read and follow all instructions in this manual. 2. Labeling Symbols Symbol Meaning Caution, Consult User’s Manual Caution, High Voltage... -
Page 4: Classification Of Equipment
To avoid the risk of electric shock, this equipment must only be CAUTION: connected to a supply mains with protective earth. Do not restrict the air flow of the product. CAUTION: Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US... - Page 5 CAUTION: as antenna cables and external antennas) should be used no closer than 12 inches (30 cm) to any part of the Protect 900, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
-
Page 6: Technical Specifications
IEC 60601-1-2, Fourth Edition Weight: Approx. 10.4 lbs UL 867 Safety for Electrostatic Air Cleaners Electrical Connection: Switched and fused with a grounded, molded power cord 6. Accessories Table or High-Tower Stand (Sold Separately). Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US... -
Page 7: Instructions For Use
Each of the two re-usable anchors used must be rated for a 20.0 lb. (9.1 kg) rating minimum, and be the appropriate size for the sheathing thickness. Use #10 size minimum. Typical drill size is 3/8" (9.5 mm) for the #10 re-usable anchor shown. Follow manufacturer’s instructions. Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US... - Page 8 Follow manufacturer’s instructions and recommendation for drill depth for insert being used. For Plywood Wall Construction Use #10 1" (25 mm) screw. Each of the two screws must be rated for 20.0 lb (9.1 kg) minimum. Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US...
-
Page 9: Service And Maintenance Instructions
9. Service and Maintenance Instructions Clean the body of the Protect 900 regularly to prevent dust from collecting. Wipe away dust from the body of the device with a soft dry cloth. Clean the air outlet with a soft dry cloth. -
Page 10: Troubleshooting
The metal frame grid should be facing towards the rear of device as shown in the image below. An additional screen has been provided for each unit to allow for rotation during the cleaning process. The Protect 900 unit should not be operated without the air intake screen in place. Service Do not open the tamper proof screws on the casing of the unit. -
Page 11: Appendix A. Guidance And Manufacturer's Declarations
Guidance and manufacturer’s declaration – electromagnetic immunity The Protect 900 is intended for use in the electromagnetic environment specified below. The customer or the user of the Protect 900 should assure that it is used in such an environment. Emissions test... - Page 12 Guidance and manufacturer’s declaration – electromagnetic immunity The Protect 900 is intended for use in the electromagnetic environment specified below. The customer or the user of the Protect 900 should assure that it is used in such an environment. IEC 60601...
- Page 13 30 A/m 30 A/m location in a typical field commercial or hospital EN 61000- environment. NOTE: Ut is the a.c.mains voltage prior to application of the test level. Document No. NOV-MNL-104 COPYRIGHT ©2021 Novaerus, US...
- Page 14 Guidance and manufacturer’s declaration – electromagnetic immunity The Protect 900 is intended for use in the electromagnetic environment specified below. The customer or the user of the Protect 900 should assure that it is used in such an environment. Immunity...
- Page 15 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Protect 900 is used exceeds the applicable RF compliance level above, the Protect 900 should be observed to verify normal operation.
- Page 16 Recommended separation distances between portable and mobile RF communication equipment and the Protect 900. The Protect 900 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Protect 900 can help prevent electromagnetic interference by maintaining a...
Need help?
Do you have a question about the Protect 900 and is the answer not in the manual?
Questions and answers