Epsolar eBox-WIFI Manual

WiFi module restore method

Dear Customer,
Firstly, thank you for buying our eBox-WIFI module.
Recently, we received many customer complaints that the module will be dead once customer
change the inside mode of eBox (from AP to AP+STA) according to the video on the Youtube to
realize monitoring the controller by computer. But the function has not been disclosure by our
company because some of defective. So we don't allow customer to change the inside mode of
eBox, it is only used for APP.
But in order to help you to restore the eBox, we provide a method to restore it, as below:
Step 1:
Open the shell of eBox, and find the forth pin of WiFi chip and the right pin of C7, as below:
Step 2:
Power on the controller and WiFi module (The WiFi module power is supplied by controller)
Step 3:
Short circuit between the forth pin of WiFi chip and the right pin of C7 through tweezers, as below: