Haier HAIPSJ64MC Instruction Manual page 16

Preci Probe & Ladle
Intelligent Wireless Food Thermometer
Thank you for purchasing Haier Preci Probe. Please note it works only with Haier induction hob and before
using it please read the following instruction and safety notes included in the user manual.
By placing the CE mark on the appliance, we are confirming compliance to all relevant European
safety, health ande environmental requirements which are applicable in legisla�on for this product.
Introduction
Preci Probe is a wireless food thermometer that gives home chefs real-time status inside the food to
avoid undercook or overcook disasters and ensuring the perfect result every time. It connects directly to
the product. Details and the real-time status of the food can be read from your phone, giving you the best
result at your fingertips. For further information on pairing and use tips, please refer to Induction user
manual
Getting Start
1. Ceramic Cap
2. Recommended immersion range
3. Sensor
4. Ladle with different position of
Preci Probe
Ladle
Use the ladle with the probe to stir food during your cooking.
- Clean the ladle before the first use.
- Do not use the ladle on an open flame.
- Do not cut the ladle.
- Do not put the ladle in direct contact with the hot accessible parts of the hob.
- Tolerated temperature range : -40 °C + 220°C
Charge the Preci Probe before using
• Put Preci Probe into the charger and close the cover.
• Connect the charger to a USB power source, such as USB adapter or USB
socket of PC/notebook with the USB cable. The charger may not be working
properly with power bank because of its auto switch-off function
• LED of the charger will turn on and is flashing during charging. It will turn
off when Preci Probe is fully charged.
Preci Probe model ET180
1
4
2
3
