Demo Sequence - Alesis NanoPiano Reference Manual

Demo Sequence

Built into your NanoPiano is a musical demo — Chopin's C-
Sharp Minor Waltz.
To run it:
1) Make sure your audio is hooked up and the power on.
2) Set the CHANNEL, CATEGORY, and PROGRAM knobs
straight up, to the "twelve o'clock" position.
3) Set the EFFECTS knob all the way counter-clockwise.
Then...
4) Turn EFFECTS all the way to the right in one quick turn.
At this point the MIDI indicator LED will turn on, and you will
hear the TrueStereo piano program begin to play the Chopin
waltz. (The reason the indicator light is flashing is because the
demo is playing from MIDI data stored in the NanoPiano ROM.)
To shut the demo off, either turn the EFFECTS knob all the way
to the left again in one quick turn, or turn the unit's power off.
Having an on-board sequence like this is useful in two different
ways.
First, it allows you to check your NanoPiano at any time in order
to make sure it's working. Second, it provides an easy way to
hear the unit's 256 different programs.
Give it a try! Start the sequence going, then step through all 16
different PROGRAM knob settings, listening to the 16 different
programs grouped together under the ACOUSTIC PIANO
category. When you're done with that, turn the CATEGORY
knob to PIANO & STRINGS and go through the 16 different
PROGRAM settings that you'll find there. And when you're done
with that, go ahead and experiment with turning the CATEGORY
and PROGRAM knobs at will.
––––––––––––––––––––––––––––––––––––––––––––––––––––
–––––
20 NanoPiano Reference Manual