Footswitches; The Xt20 Remote - Alesis ADAT-XT20 Reference Manual

20-bit digital audio recorder
Table of Contents

Advertisement

Chapter 3: Connections
F
OOTSWITCHES
The XT20 provides two footswitch connectors using 1/4" mono (T/S) jacks. One,
labeled [LOCATE/PLAY LRC REMOTE], allows locate and play commands
when used with a standard footswitch, or more elaborate control when used
with the LRC Remote control; the other, labeled [PUNCH IN/OUT ], is for
punch in/out control.
The two footswitch jack functions are designed to be used with any momentary
single-pole/single-throw footswitch (either normally open or normally closed).
These should be plugged in prior to power-up so that the XT20 can configure
itself for the type of footswitch being used.
The Punch In/Out footswitch and XT20 Remote both work in conjunction with
the Rehearse and Auto Record features.
T
XT20 R
HE
Both the [LOCATE/PLAY/LRC REMOTE] and [PUNCH IN/OUT]
footswitch connectors can be used to connect the hand-held XT20 remote control
unit to provide remote access of transport functions. You can even connect two
XT20 remote controls into the XT20, one in each footswitch jack.
If using a normally open footswitch, the footswitch and remote control can be
interchanged, or used simultaneously with a Y-cord, without restarting the
XT20 (powering down and powering up). However, if using a normally closed
footswitch, the XT20 should be restarted after switching from footswitch to
remote control or vice-versa.
42
EMOTE
ADAT XT20 Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adat xt20

Table of Contents