Floor Installation
300mm
or more
300mm
or more
Drain hose
Drain hose
Unit : mm
����
���
Back side
��
��
10
E-
1
Select pipe directions.
When the directions are selected, drill 3-1/8'' (100mm, for pipe and cables)
and 1-3/4'' (40mm, for drain hose) diameter holes on the wall so that it
slants slightly downwards toward the outdoor for smooth water flow.
Note
Use the pattern sheet to select pipe directions.
2
Install the hanging plate according to the distance and mount it.
3
Install the unit and be sure to arrange the drain hose so that it is leveled lower
than the drain hose connecting port of the indoor unit.