Safety Instructions - Siemens SIMATIC EMS400S PSB-S Operating Instructions Manual

Hide thumbs Also See for SIMATIC EMS400S PSB-S:
Table of Contents

Advertisement

Safety instructions

Injury or material damage
You risk the development of danger sources and deactivation of safety functions if you
neglect the safety and handling instructions provided in this document. This can result in
personal injuries or material damage.
Strictly adhere to the safety and handling instructions.
Always adhere to the safety instructions and accident prevention regulations for the
respective application, independent of the safety instructions provided in this document.
Safety in the project
Injury or material damage
The configuration engineer for a plant controller must take appropriate measures to ensure
the proper restart of an interrupted program after a voltage dip or power failure.
Dangerous operating states may not develop at any time during runtime of the program and
during troubleshooting.
Safety during commissioning and operation
Note
It is strictly prohibited to commission the device unless compliance with Machinery Directive
2006/42/EC has been verified for the machine to be operated with this device. Verify that all
requirements of the machinery directive have been met before you start commissioning.
Observe the relevant safety guidelines when using PSB modules in an EMS. For more
information, refer to the section "Safety instructions" in the "EMS400S Carrier Controller for
Electric Monorail Systems" system manual. The safety concept is also described there.
PSB modules
Operating Instructions, 03/2014, A5E03474166-03
WARNING
WARNING
3
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic ems400s psb-c6es7228-1rc52-0aa06es7228-1rc51-0aa0

Table of Contents