Table of Contents
Advertisement
Quick Links
NOTICE
This supplied air respirator conforms to all NIOSH
specifications and standards and carries NIOSH
approval.
As
manufactured,
complies only with those foreign approvals that
accept NIOSH certification. Specifically, it has not
been manufactured to European
and does not carry the European
© 2011 CLEMCO INDUSTRIES CORP.
One Cable Car Dr.
Washington, MO 63090
Phone (636) 239-4300
F
(800) 726-7559
ax
Email: info@clemcoindustries.com
www.clemcoindustries.com
APOLLO SUPPLIED-AIR RESPIRATOR
MC FILE NUMBER: 2186-1103
DATE OF ISSUE:
REVISION:
Do not proceed with
these instructions until
you have READ the
orange cover of this
MANUAL and YOU
UNDERSTAND its
contents. *
These WARNINGS are
this
respirator
included for the health
and safety of the
standards
mark.
operator and those in
the immediate vicinity.
*If you are using a Clemco Distributor
Maintenance and Part Guide, refer to
the orange warnings insert preceding
the Index before continuing with the
enclosed instructions.
Electronic files include a Preface
containing the same important
information as the orange cover.
Helmet Model 600
High Pressure 65 psi to 100 psi
O. M. 23930
November, 2003
E, 01/11
WARNING
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clemco 600
Summary of Contents for Clemco 600
- Page 1 © 2011 CLEMCO INDUSTRIES CORP. One Cable Car Dr. Washington, MO 63090 *If you are using a Clemco Distributor Phone (636) 239-4300 Maintenance and Part Guide, refer to (800) 726-7559 the orange warnings insert preceding Email: info@clemcoindustries.com...
-
Page 2: General Instructions
DO NOT modify or substitute any Clemco parts with other The products described in this material may be combined by types or brands of equipment. Unauthorized modification... - Page 3 ALWAYS attach safety cables at ALL air hose AND blast 1910.244). hose coupling connections. Cables relieve tension on hose and control whipping action in the event of a coupling blow-out. • NEVER modify OR substitute remote control parts. Parts from different manufacturers are NOT compatible with Clemco...
-
Page 4: Maintenance
• Training and Educational Programs. free of the rightful claim of any third party by way of patent Clemco Industries Corp. offers a booklet, Blast-Off 2, infringement or the like. developed to educate personnel on abrasive blast equipment 6. This warranty is conditioned upon seller’s receipt within ten function and surface preparation techniques. - Page 5 PREFACE □ □ 3. Clean, properly maintained NIOSH-APPROVED 8. BLAST HOSE with ID 3 to 4 times the nozzle orifice. SUPPLIED-AIR RESPIRATOR. ALL components should Lines MUST be run AS STRAIGHT AS POSSIBLE from ALWAYS be present. NEVER operate without inner lens in machine to work area with NO sharp bends.
- Page 6 CMS-2 Carbon Monoxide Monitor ....22925 components with this respirator. Safety Alerts 1.2.1 Clemco uses safety alert signal words, based on ANSI Z535.4-1998, to alert the user of a potentially hazardous situation that may be encountered while operating this equipment. ANSI’s definitions of the signal words are as follows: This is the safety alert symbol.
-
Page 7: Toxic Dust Poisoning
NIOSH as a Type-CE, continuous-flow, Tin, Nitrate and Nitrite, to unprotected abrasive abrasive blast, supplied-air respirator, in blasting operators and other personnel who may accordance with title 42 CFR Part 84. The NIOSH © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com... - Page 8 1000 to all Apollo Series Respirators based on the simulated workplace protection factor studies Cautions and Limitations Clemco has performed. These studies are available A - Not for use in atmospheres containing less than 19.5 for download from Clemco’s Website percent oxygen.
- Page 9 NOTE: If the respirator does not include an approved Clemco respirator hose, and if one is not at the work site 1.8.3 Face and Eye: The Apollo inner lens meets for use with the respirator, one or more alternate hoses impact and penetration requirements under ANSI Z87.1-...
- Page 10 OSHA limits. lenses are securely held in position by the window frame. Always use an inner lens and an intermediate © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com...
- Page 11 Use any " the respirator in this manner may damage the 25-foot, 50-foot and 100-foot Clemco respirator hoses in tube or helmet inlet. Any leaks or breaks in the any combination as noted in the table in Section 4.4, not breathing tube will alter the air flow through the to exceed 300 ft.
-
Page 12: Compressed-Air Supply
The employer is responsible for ensuring that CMS-3 CO Monitor Option, Respirator Mounted The Clemco supplied air respirator model Apollo 600 HP breathing air shall meet the requirements for Grade D or is NIOSH approved with the accessory CMS-3 personal... - Page 13 4.4.2.1 When using a CFC constant-flow connector or ACV air valve, the respirator must be supplied with 15 4.4.1.2 The Clemco CPF Inline Particulate Filter with cfm (cubic feet per minute) of Grade D breathing air at regulator meets this requirement for a regulator and ©...
-
Page 14: Operation
4.4.3.1 This optional accessory kit contains parts and inside. Holding the chin strap while donning the helmet instructions to convert an Apollo 600 respirator from high will make it easier to position it once the helmet is on. pressure (65 to 100 psi) to low pressure (6 to 20 psi). - Page 15 6.1.1 Web Suspension with Sweatband 6.2.1 Clemco’s ACV air-control valve allows the user to increase or decrease the volume of breathing-air while 6.1.1.1 Remove the cape from the helmet per Section wearing the supplied-air respirator. The valve provides a 9.4.
-
Page 16: Maintenance Program
Place the bag in a clearly-marked occurs that prevents the cape from providing the carton and store it in a clean, dry place. protection for which it is intended. © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com... -
Page 17: Cleaning And Disinfecting
For high-abrasion applications and chin strap with warm water and mild detergent. and/or the convenience of tearing off frosted lenses Rinse with clean, warm water. during the work period. © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com... - Page 18 Locating lugs window gasket and then install the lens and gasket onto the helmet as an assembly. Figure 5 9.2.1 Replace the inner lens when it becomes dirty or scratched. © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com...
- Page 19 Replace them if they are attached by pressing them onto the fastener strips. are loose or missing. The black side faces toward the inside of the helmet. © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com...
- Page 20 The collar unzips from the outer cape for replacement or washing. See Section 8.2 for cleaning instructions. © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com...
-
Page 21: Replacement Parts
Connect the breathing tube and use the tube for leverage to tighten the inlet fitting. Do not use a wrench Apollo 600 HP Less Respirator Hose, with: to tighten the fitting, as it may damage the helmet. Leave the breathing tube connected until the cyanoacrylate has Description Stock No. - Page 22 APOLLO HIGH PRESSURE SUPPLIED-AIR RESPIRATOR Page 17 HELMET MODEL 600 10.4 Accessories 10.2 Apollo 600 HP DLX Supplied-Air Respirator Systems with DLX Padded Suspension and Description Stock No. Alternate Accessories Hearing protection muffs, Apollo 600 HP DLX Supplied-Air Respirator Low profile noise reduction muffs Less Respirator Hose, with: for use with web suspension w/sweatband only.
- Page 23 Hook-fastener tape, 1" adhesive backed, Chin strap ..........04460 1-inch x 3-feet long........24656 Alternate DLX Padded Suspension 3, 4, 5 Some items are rotated for clarity Figure 8 © 2011 CLEMCO INDUSTRIES CORP. Manual No. 23930 www.clemcoindustries.com...
Need help?
Do you have a question about the 600 and is the answer not in the manual?
Questions and answers