Take the front panel with you when leaving the car, and
keep it in the supplied carrying case.
Detaching the front panel
Before detaching the front panel, remove the cassette to
prevent possible damage to the unit.
Press z to remove the cassette.
Press and hold PWR/MUTE until the unit turns off.
Press %. (Hold the panel with one hand to prevent
accidentally dropping it.)
Remove the panel.
Attaching the front panel
Engage the left side of the front panel to the left catch
on the unit.
Push the panel forward until it locks. Be sure not to
press any buttons while you are attaching the panel.
Do not touch the connector on the reverse side of the
front panel. This could cause a poor or faulty connection.
AUDIO AND CLOCK
Turning the unit on/off
• You can turn the unit on by pressing any button on the
front panel except %, z, f, g and AUDIO
CONTROL. The unit also turns on when you insert a
• Press and hold PWR/MUTE until the unit turns off.
Most operations described in this manual require
the unit to be turned on before starting the operation,
unless explicitly stated otherwise.
Changing the source mode
Pressing SRC cycles through source modes in the
* Tape Play mode (available while a cassette is in the
** CD Changer Play mode (available when an optional
CD Changer is connected)
Adjusting the volume
Turn AUDIO CONTROL.
VOL (volume) indicator flashes.
Muting the sound
Press PWR/MUTE briefly.
MT indicator flashes.
To restore volume, briefly press PWR/MUTE again.