Diagnostics" Submenu; Diagnostics; Actual Diagnostics; Previous Diagnostics - Endress+Hauser Micropilot FMR10 Operating Instructions Manual

Micropilot FMR10

Actual diagnostics

Navigation
Description

Previous diagnostics

Navigation
Description

Delete previous diagnostic

Navigation
Description
Selection
Factory setting
Signal quality
Navigation
Description
Endress+Hauser
13.3

"Diagnostics" submenu

Navigation 
 Diagnostics → Actual diagnostics
Displays current diagnostic message. If several messages are active at the same time, the
messages with the highest priority is displayed.
 Diagnostics → Previous diagnostics
Displays the last diagnostic message, with its diagnostic information, which has been
active before the current message. The condition displayed may still apply.
 Diagnostics → Delete previous diagnostic
Delete previous diagnostic message? It is possible that the diagnostic message remains
valid.
• No
• Yes
No
 Diagnostics → Signal quality
Displays the signal quality of the level echo. Meaning of the display options - Strong: The
evaluated echo exceeds the threshold by at least 10 dB. - Medium: The evaluated echo
exceeds the threshold by at least 5 dB. - Weak: The evaluated echo exceeds the threshold
by less than 5 dB. - No signal: The device does not find a usable echo. The signal quality
indicated in this parameter always refers to the currently evaluated echo, either the level
echo or the tank bottom echo. In case of a lost echo (Signal quality = No signal) the device
generates the following error message: Diagnostic echo lost = Warning (factory setting) or
Alarm, if the other option has been selected in Diagnostic echo lost.

Diagnostics

Operating menu

63