Before carrying out any maintenance, disconnect the appliance
from the power supply.
Ensure that the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
Do not pull the appliance by the handle.
Keep the minimum distance from other
appliances and units.
Install the appliance in a safe and suitable place
that meets installation requirements.
WARNING! Risk of fire and electric
All electrical connections should be made by a
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
Do not use multi-plug adapters and extension
Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
If the mains socket is loose, do not connect the
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
must have a contact opening width of minimum
This appliance complies with the E.E.C.
WARNING! Risk of injury, burns and
electric shock or explosion.