ABB axial A100-M Series Original Assembly Instructions page 15

Assembly Instructions / A170-M, A175-M
4 Installing the turbocharger / ​
Fixing clamping nuts
Fig. 8: CE foot contact surface
Tighten clamping nuts on compressor end (CE) (see Tightening the clamping nut).
u
Fig. 9: TE foot: Handling of cup spring contact surface / foot contact surface
Grease the contact surface (F) for the cup springs (X)
u
sion and strength class →12)
grease.
Tighten clamping nuts on turbine end (TE) (see Tightening the clamping nut).
u
© Copyright 2020 ABB. All rights reserved.
on the foot of the turbine end (TE) with high-temperature
HZTL455311P0007_EN
(see Table 5: Foot screws, dimen-
Rev.A July 2020