Dp Connector P300; Function Test - HP 27f 4k Maintenance And Service Manual

3) Lift the P200 or P201 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.

DP connector P300

Repair the DP connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the P300 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.

Function test

After repair, be sure to confirm that all functions are working.
Table 4-1: Function test
Te Test item
st item
HDMI test
16
DP test
Operating description Operating description
Confirm whether image displays and sound plays
correctly on the monitor.
Confirm whether image displays and sound plays
Tool used Tool used
Computer or DVD player
Computer or DVD player