Turb Control; Hazard Display Control - Honeywell IntuVue RDR-4000 Pilot's Manual

TURB CONTROL

On control panels with a TURB switch, pull the switch out first, then
move it to the desired location.
On control panels with a TURB pushbutton, push the button to engage.
Push it again to disengage the feature. A light will indicate when the
feature is active.

HAZARD DISPLAY CONTROL

Push the HZD button to engage. Push it again to disengage the
feature. A light will indicate when the feature is active.
Equipment Description
30
IntuVue RDR-4000 Weather Radar Pilot's Guide
AUTO: Turbulence indications will be overlaid on
the weather display in ALL and ON PATH modes.
OFF: Turbulence data will not be shown
ENGAGED: Turbulence indications will be overlaid
on the weather display in ALL WX, PATH WX, and
ELEVN modes.
ENGAGED: Hail and/or lightning icons will be
shown overlaid on the weather display in ALL WX,
PATH WX, and ELEVN modes.
OFF: Hazard icons will not be shown.
D201002000008
Rev 1, December 2014