Table of Contents
Advertisement
Step 1: Connect the AC adapter and power cord:
1a) Plug the AC adapter into the Drive's Power Port.
The AC adapter connector can be inserted into
the Drive' s Power Port only one way. It should not
require much effort to plug in. If the connector will
not go in, check the orientation and try again. Do
not force the connector or you may damage it
and/or the Drive and void the warranty.
1b) Plug the power cord into the socket in the AC
adapter. Plug the other end into an AC outlet.
Step 2: Connect the interface cable:
2a) Select the interface cable you wish to use and plug one end into a
corresponding port on your computer/hub.
2b) Plug the other end into the correct port on the back of the Drive.
Step 3: Flip the Drive's Power Switch to turn it on:
When the Drive mounts to your operating system, it's ready to use...
Windows users will see a new drive icon/letter in My Computer.
Mac users will see a new icon on the Desktop and in the Finder.
8
Advertisement
Table of Contents
