Properties - Siemens SIMATIC ET 200S IM151-1 FO STANDARD Manual

Properties

Properties
The IM151-1 FO STANDARD interface module has the following features:
● It connects the ET 200S with PROFIBUS DP via the fiber-optic interface.
● Connectable fiber optic cables made from plastic optical fibers (POF) or plastic-coated
● On SIMATIC S7 (in DPV1 mode), the maximum parameter length is 240 bytes per slot.
● The maximum address space is 244 bytes for inputs and 244 bytes for outputs.
● Operation as a DPV0 or DPV1 slave
● A maximum of 63 modules can be operated with the IM151-1 FO STANDARD.
● The maximum bus length is 2 m.
● It supports option handling and the status byte for power modules.
● Firmware update over PROFIBUS DP with STEP 7
● Identification data (with DS248 or DS255)
● Direct data exchange (publisher)
The IM151-1 FO STANDARD interface module (6ES7151-1AB05-0AB0) replaces the
predecessor interface modules 6ES7151-1AB02-0AB0.
Installation constraints
For every 2DO 24 to 230 V AC electronic module used, the number of connectable I/O
modules in this station is reduced by one.
IM151-1 FO STANDARD interface module (6ES7151-1AB05-0AB0)
Manual, 02/2010, A5E01075965-03
fibers (PCF)
1
7