Mitsubishi Electric QAHV-N560YA-HPB Service Handbook page 67

[ IV Remote Controller ]
<3> Using Weekly timer
Function description
Following settings can be used to change the operating schedule according to the day of the week.
Set the schedule for ON/OFF, operation mode and set temperature for each day of the week.
Button operation
1
Unit1
Weekly timer
Period timer
Power Save
F1 F2
2
Unit1
SUN MON TUE WED THU
Mode1
Mode2
Off
F1 F2
3
Unit1
SUN MON TUE WED THU
Mode1
Mode2
Off
F1 F2
HWE1517A
Select "Weekly timer" from the Schedule menu, and press the [Select] button.
FRI
F3 F4
The Weekly timer screen will be displayed.
FRI
FRI SAT
To check the operation settings:
Press the [F1] or [F2] button to check the settings from Monday to Sunday.
The [F4] button displays the following page.
To change the operation settings:
Press the [F1] or [F2] button to select a day and then press the [F3] button to
F3 F4
confirm the day to be set. (Multiple days can be selected.)
After selecting the desired day, press the [Select] button.
The pattern setting screen will be displayed.
FRI
FRI SAT
Press the [F1] button to select a pattern.
Press the [F2] button to select the item you want to change.
Press the [F3] or [F4] button to switch to the desired setting.
Time
Operation mode,
Off
F3 F4
Set temperature
Weekly timer operation is disabled in the following situations:
When Schedule is disabled
On days when the period timer is also enabled
Weekly timer operation may not be executed depending on the system configuration.
Navigating through the screens
■ To save the settings ...... [Select] button
■ To return to the Main display ...... [Menu] button
■ To return to the previous screen ...... [Return] button
Set in 5-minute increments.
* Hold down the button to change the value continuously.
The options available vary depending on the connected unit.
* If you select an operation mode other than Off, the connected unit will
operate.
You can change the set temperature (in 0.5°C increments).
- 60 -
GB