[ IX Troubleshooting ]
Step No.
Remove the pipes from the four sections encircled in the figure below (refer to the replacement procedures for refrigerant circuit
components), pull out the pipes indicated by the black rectangle in the figure below, and pull the gas cooler forward.
4
Install the gas cooler, braze the pipes, and re-place all parts that were removed in the steps above.
Gas cooler assy (standard)
Parts code: R12 030 105
Gas cooler assy (BS)
Parts code: R12 031 105
5
Insert the tabs on the gas cooler
leg into the corresponding slots.
HWE1517A
Replacement instructions for the gas cooler [QAHV-N560YA-HPB]
Procedure
- 154 -
GB