Cleaning And Maintenance; External Cleaning; Interior Cleaning - TECHWOOD TFR-300A Instruction Manual

1. Always Check that the power cable is unplugged.
2. Wait until the fryer has completely cooled before starting the cleaning.
Note: It is important to wait one to two hours after use avoid any risk of burns.
3. Filter the oil through a sieve placed on a suitable container, pouring it by the
side.

EXTERNAL CLEANING

- Wipe the outside of your fryer after each use with a soft and wet rag, soaked
with soapy water.
- Never use abrasive pads
- Not to immerse the control board in water or another liquid.
- Never immerse the appliance in water or wash it directly by water.

INTERIOR CLEANING

- Benefit from each oil renewal to clean the interior of your apparatus in order to
preserve your fryer in good state.
- Remove the lid.
- Remove the basket from the tank.
- Detach the handle from the basket.
- Remove the oil of the tank. Wipe the tank with absorbing paper of kitchen.
- The tough deposits of grease can be removed using a sponge of kitchen, a
nylon brush or a rag soaked with detergent for crockery.
- The parts (removable) in contact with food like basket, plate, bowl, forks,
Spatula etc. can be washed in hot water with sponge and soft detergent or put
in the dishwasher. Rinse and dry carefully.
- Wipe well the lid, the basket and the tank before refilling with oil.
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place.
Before being delivered, all our products are subjected to a rigorous control.

CLEANING AND MAINTENANCE

STORAGE
GUARANTEE
12