Performing the first synchronisation process
After completing the setup procedures you can now perform the first ActiveSync
operation with the help of the 'New Partnership' setup wizard.
This wizard will help you:
• Set up a partnership so you can synchronise information between your
handheld and your computer
• Customise your synchronisation settings
To perform the first synchronisation process
1
Connect the cradle.
For instructions, refer to page 10.
2
Insert your handheld in the cradle.
The bottom edge of your handheld should align smoothly with the cradle when it is
inserted properly.
3
Plug the cradle's USB connector into a USB port on your computer.
The 'New Partnership' setup wizard will automatically start on your computer screen.
1 G e t t i n g s t a r t e d
Preparing to use your Acer n20
13