Adding And Removing Programs; Adding Programs - Acer n20 Manual

1 1 C u s t o m i s i n g y o u r h a n d h e l d

Adding and removing programs

Adding and removing programs
1
134
Network Adapters
Select your handheld's network adapter and set its properties.
Programs bundled with your handheld at the factory are stored in ROM (read-only
memory). You cannot remove these programs, and you'll never accidentally lose ROM
contents. ROM programs can be updated using special installation programs with a
*.xip extension. All other programs and data files installed to your handheld after
factory installation are stored in RAM (random access memory).
You can install any program created for your handheld, as long as it has enough
memory. The most popular place to find software for your handheld is on the Pocket
PC Web site (http://www.microsoft.com/mobile/pocketpc/).

Adding programs

You could add programs to your handheld either by using ActiveSync or by
downloading the program from the Internet.
To add programs using ActiveSync
You'll need to install the appropriate software for your handheld on your computer
before installing it on your handheld.
Determine your handheld and processor type so that you know which version of the
software to install.
a Tap and then Settings.
b On the System tab, tap About.
c In the Version tab, make a note of the information in Processor.