1 Getting started
Preparing to use your Acer n300
1
2
3
1
2
3
4
5
12
To connect the computer
Via the USB Sync cable
Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
Plug the AC adapter into any AC current outlet.
Plug the USB client connector into an available USB port on your computer.
Via
the Cradle
Connect the AC adapter cord to the DC-in jack at the back of the cradle.
Put n300 on the cradle.
Plug the AC adapter into any AC current outlet.
Connect the mini USB client connector into the USB client port at the back of the
cradle.
Plug the USB client connector into an available USB port on your computer.