Powering On/Off The Projector; Powering On The Projector - Acer PD725 User Manual

Turn on the
projector first and then
the signal sources.

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will turn red.
3. Turn on the lamp by pressing "Power/Standby" button on
the control panel.
The startup screen will display for 30 seconds and the
Power LED will flash green.
When the startup screen disappears, the Power LED will
turn green.
4. Turn on your source (computer, notebook, video player, etc.).
The projector will detect your source automatically.
If the screen displays "Searching", please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
"Source" button on the control panel to switch.
Installation
Power/Standby
1
11 ... English