Usage; Installation Guide - Acer AL1714 User Manual

Usage

Installation
Note: Read the [Safety Rules] section carefully before starting the installation
Guide
Attention Before installing your LCD display, consider the following with reference to the space where the
display is to be installed:
Complete the following steps for quick installation: (See the figure)
Quick
Installation
Assemble the seat of the display
Connection to PC
To minimize the reflection of the display, protect your eyes and ensure premium quality,
don't install your LCD display near windows or with backlight. Keep the display away from
your eyes at least by 30 cm.
The upper edge of the display should be a little higher than your sight.
Adjust the front and back dip angles of the display based on your visual angle so that you
can view the display comfortably.
Take the seat out of the box
Take your LCD display out of the carton and assemble the
display and seat along the rail. You will hear a click sound
when the display and seat are engaged correctly.
Make sure that the power supply of your PC is turned off
and the power plug is removed.
Connect and fasten both ends of the signal cable to your
PC host and LCD display respectively.
If your LCD display has built-in speakers, connect the audio
cable attached to the display from the sound card output of
your PC to the audio input on the back of your LCD display.
Connect the attached power cable to your LCD display.
Plug the power cable to the receptacle.
Turn on the power supplies of your PC and LCD display.
and place it on a flat table.
2
Signal Cable
Audio Cable
Transformer DC end