Cpu Vtt Voltage - Abit Fatal1ty FP-IN9 SLI User Manual

- FSB:Memory Ratio
This item selects the CPU-to-DRAM ratio.
Options: [Auto], [1:1], [5:4], [3:2], [Sync Mode].
- FSB (QDR)
This item selects the front side bus frequency.
Due to the specification limit of the CPU you installed, the speed you set over
※
its standard bus speed is supported, but not guaranteed.
- Estimated New FSB (QDR)
This item displays the estimated new front side bus frequency.
- Estimated New CPU Clock
This item displays the estimated new CPU processor speed.
- MEM (DDR2)
This item determines the DRAM frequency.
- Estimated DDR2 Data Rate
This item displays the estimated DRAM frequency.
- Multiplier Factor
This item displays the multiplier factor for the CPU you installed.
NB PCIe X16 Clock
This item determines the PCI Express slot frequency (slot PCIEXP1).
Voltages Control
This option allows you to switch between the default and user-defined voltages. Leave this
setting at default unless the current voltage setting cannot be detected or is not correct. The
option "User Define" enables you to select the following voltages manually.
- CPU Core Voltage
- DDR2 Voltage
- DDR2 REF Voltage
-

CPU VTT Voltage

- NB Voltage
FP-IN9 SLI 2-3