Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Electronic Audio Experiments feT
- Page 1 Technical Document Model feT Manual Version 2 Last Revised: 21-Oct-20 John Snyder...
- Page 2 Model T reproduction in solid-state format. The Model fet may serve as an overdrive pedal into an existing amp, as a preamplifier going direct into a power amp (alternately into the effects return of an amp bypassing...
- Page 3 “dirty clean” the Model T is known for all the way up to heavy rock tones with deep bass extension. When the Model feT is set for lower gain, it shapes the tone of other pedals stacked into it. At the end of a signal chain, it adds an entirely new dimension to existing fuzzes, distortions, boosts, and even modulation or time-based effects.
- Page 4 Dialing in the Model feT for the first time is straightforward. Set all EQ knobs at noon, Normal control at 12:00, and Brite and Master at minimum. Turn on the pedal, and slowly bring up the Master until you reach the desired output level.
- Page 5 11:00 or so. Bass players and low-tuned guitarists may find this helpful. Note: The Model feT can get EXTREMELY loud so starting from zero is recommended for new users. At higher gain settings, unity volume can be below 9:00. We gave this pedal a lot of power at the output, so that clean tones may be dialed in without sacrificing volume.
- Page 6 Model T tones come from slamming it with a Proco Rat (or similar pedal)! In conclusion… The Model feT is far more than a soundalike overdrive for doom metal - it is a full preamplifier and a powerful tool for both live and studio tone shaping. Thanks again!
Need help?
Do you have a question about the feT and is the answer not in the manual?
Questions and answers