Adjusting Measuring Reference / Tripod; Multifunctional Endpiece; Unit Setting - geo-FENNEL GeoDist User Manual

Operations

Adjusting measuring reference / tripod

1
Distance is measured from the
front of the device.
3
Distance is measured from the rear
of the device (standard setting).

Multifunctional endpiece

Press button
2 sec and
i
reference
2
from front is
set per-
manently.
The orientation
of the endpiece
i
is automatically
detected and
the zero point is
adjusted ac-
cordingly.
geo-FENNEL GeoDist ®
Distance is measured
from the tripod thread
permanently.

Unit setting

Switch between the
following units:
0.000 m 0.00 ft
0.0000 m 0'00'' 1/32
0.00 m 0.00 in
0 in 1/32
EN
5