Advertisement
Quick Links
Certification
This torque wrench as calibrated at the factory is
certified to meet the accuracy in specifications:
ASME B107.14-2004 and ISO 6789:2003.
Additionally, all wrenches are calibrated on
a torque standard traceable to the National
Institute of Standards Technology (N.I.S.T.)
Conversion Table
Convert From
To
ozf.in
lbf.in
lbf.in
ozf.in
lbf.in
kgf.cm
lbf.in
lbf.ft
lbf.in
kgf.m
lbf.in
N.m
lbf.in
dN.m
lbf.ft
N.m
lbf.ft
kgf.m
lbf.ft
lbf.in
N.m
dN.m
N.m
kgf.cm
N.m
kgf.m
N.m
lbf.in
N.m
lbf.ft
dN.m
lbf.in
dN.m
N.m
kgf.cm
lbf.in
kgf.cm
N.m
kgf.m
lbf.ft
kgf.m
N.m
For your Permanent File:
Wrench Model Number:
Serial Number:
Multiply By
0.0625
16
1.1519
0.083333
0.011519
0.1130
1.130
1.356
0.1382
12
10
10.20
0.10197
8.8507
0.73756
0.885
ASG, Division of Jergens, Inc.
0.100
Cleveland, OH | 888-486-6163
0.8681
0.09807
7.233
9.807
FORM 20-270A-ASG
02/08
REV. A
Standard Manual
Torque Screwdrivers
Pre-Set
Operation Manual
ASG, Division of Jergens, Inc.
S. Waterloo Road
15700
Cleveland, OH
44110-3898
Phone: (
888) 486-6163
| Fax: (
216) 481-4519
Email: asginfo@asg-jergens.com
Web: www.asg-jergens.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ASG Pre-Set
Summary of Contents for ASG Pre-Set
- Page 1 0.1382 lbf.ft lbf.in dN.m kgf.cm 10.20 kgf.m 0.10197 Operation Manual lbf.in 8.8507 lbf.ft 0.73756 ASG, Division of Jergens, Inc. dN.m lbf.in 0.885 ASG, Division of Jergens, Inc. dN.m 0.100 Cleveland, OH | 888-486-6163 S. Waterloo Road 15700 kgf.cm lbf.in 0.8681...
- Page 2 Safety Messages Adjustments of Torque Settings Adjust until the desired torque setting is reached. Turn the screwdriver several more times on the tester and fine tune WARNING the setting to as repeatable a number Read operation manual completely before as possible. Replace end cap. using torque instrument and store for future Install the proper bit into the hex reference.
Need help?
Do you have a question about the Pre-Set and is the answer not in the manual?
Questions and answers