Het Bios Updaten - Dell OptiPlex 3020M Owner's Manual

Table 13. Cloud Desktop
Option
Server Lookup Method
Server IP Address
Server Port
Client Address Method
Client IP Address
Client SubnetMask
Client Gateway
Advanced
Table 14. System Logs
Option
BIOS events

Het BIOS updaten

Het wordt aanbevolen uw BIOS (system setup) bij te werken wanneer het moederbord wordt vervangen of als er een update
beschikbaar is. Op een laptop moet u ervoor zorgen dat batterij volledig is opgeladen en dat de computer is aangesloten op een
stopcontact.
1. Start de computer opnieuw op.
2. Ga naar dell.com/support.
42 Installatie van het systeem
Description
Specifies how the Cloud Desktop software will looks up the server addresses.
● Static IP
● DNS - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the primary static IP address of the Cloud Desktop server with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies the primary IP port of the Cloud Desktop, which is used by the client to
communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies how the client obtains the IP address.
● Static IP
● DHCP - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies the gateway IP address of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies for Advanced debugging
● Verbose Mode - This option is not set by default.
NOTE: This Option is only relevant when the integrated NIC control in the System
Configuration group is set to enable with Cloud Desktop.
Description
Displays the system event log and allows you to clear the log.
● Clear Log