Aktualizace Systému Bios - Dell OptiPlex 3020M Owner's Manual

Table 13. Cloud Desktop
Option
Server Lookup Method
Server IP Address
Server Port
Client Address Method
Client IP Address
Client SubnetMask
Client Gateway
Advanced
Table 14. System Logs
Option
BIOS events
Aktualizace systému BIOS
Systém BIOS (nastavení systému) se doporučuje aktualizovat tehdy, když měníte základní desku nebo je k dispozici aktualizace.
V případě notebooků zajistěte, aby baterie byla plně nabitá a notebook byl připojen do elektrické sítě.
1. Restartujte počítač.
2. Přejděte na web dell.com/support.
3. Zadejte servisní označení nebo kód expresní služby a klepněte na tlačítko Submit (Odeslat).
Description
Specifies how the Cloud Desktop software will looks up the server addresses.
● Static IP
● DNS - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the primary static IP address of the Cloud Desktop server with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies the primary IP port of the Cloud Desktop, which is used by the client to
communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies how the client obtains the IP address.
● Static IP
● DHCP - This option is enabled by default.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop.
Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies the gateway IP address of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration group is set to Enable with Cloud Desktop .
Specifies for Advanced debugging
● Verbose Mode - This option is not set by default.
NOTE: This Option is only relevant when the integrated NIC control in the System
Configuration group is set to enable with Cloud Desktop.
Description
Displays the system event log and allows you to clear the log.
● Clear Log
Nastavení systému 41